|
|
|
|
Motor |
Gear Box |
Clutch and Brake Mechanism |
|
¡¯ |
Motor |
5IK40GK-S |
¡¯ |
Gear Box |
5GN3K |
¡¯ |
Clutch and Brake Motor |
NCB5GN |
|
|
|
|
:: Motor Specifications
Frame Size |
Wiring Type |
Output Power |
Voltage |
Frequency |
Output Power |
Starting Torque |
Max.Output Power |
Rated Speed |
Capacitor |
[mm] |
|
[W] |
[V] |
[Hz] |
[A] |
[Kgfcm] |
[Kgfcm] |
[r/min] |
[£gF] |
90 |
Lead wire |
40 |
Three-phase 200 |
50 |
0.4 |
4 |
4 |
1300 |
0 |
90 |
Lead wire |
40 |
Three-phase 220 |
60 |
0.4 |
2.6 |
2.6 |
1650 |
0 |
90 |
Lead wire |
40 |
Three-phase 230 |
50 |
0.4 |
2.6 |
2.6 |
1300 |
0 |
¡´ ¡@ |
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2 to 20% less than the displayed value, depending on the size of the load. |
¡´ |
The actual speed is 2 to 20% less than the displayed value, depending on the size of the load.
|
|
:: Clutch/Brake Specifications
Clutch and Brake Mechanism/Speed Control Pack |
Holding Brake Torque |
Voltage |
Input |
Cycle Rates |
|
[Kgfcm] |
[V] |
[W (at 75¢XC)] |
[times/minute] |
4#Clutch
|
5 |
24VDC |
7 |
60 |
4#Brake
|
5 |
5#Clutch |
15 |
24VDC |
7 |
100 |
5#Brake
|
5 |
¡´ |
Insulation Resistance : 100M ohms or more when measured by a 500 VDC
megger between the clutch/brake lead wire and the frame. |
¡´ |
Dielectric Strength : Sufficient to withstand 1.0 kV at 50 Hz
applied between the clutch/brake lead wire and the frame for 1
minute.
|
|
:: Gear Box
Specifications
Gear Type |
Gear Ratio |
Direction of Rotation |
Frequency |
Speed |
Permissible Torque |
Permissible Overhung
Load |
Permissible Thrust
Load |
from the tip of the shaft 10mm |
from the tip of the shaft 20mm |
|
¡@ |
¡@ |
[Hz] |
[r/min] |
[Kgfcm] |
[Kgfcm] |
[Kgfcm] |
[Kgfcm] |
Parallel Shaft |
3
|
Same direction as the motor shaft |
50
|
500 |
9.72
|
25 |
35 |
10
|
Parallel Shaft |
3
|
Same direction as the motor shaft |
60
|
600 |
6.318
|
25 |
35 |
10
|
Parallel Shaft |
3
|
Same direction as the motor shaft |
50
|
500 |
6.318
|
25 |
35 |
10
|
¡´ ¡@ |
The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio.
The actual speed is 2 to 20% less than the displayed value, depending on the size of the load. |
¡´ |
The actual speed is 2 to 20% less than the displayed value, depending on the size of the load. |
¡@ |
:: Characteristics/Dimensions/Wiring Diagrams
Characteristics/Wiring Diagrams |
|
Dimensions |
|
|
:: Safety Standards
Applicable Standards |
Certification Body |
Standards File No. |
EN
560335-1:1994+A11:1995.+A12:1996.+A13:1998 and +A14:1998 |
SGS |
EL00583-1
EL00583-2 EL00583-3 EL00583-4 EL00583-5 EL00583-6
EL00583-7 EL00583-8 |
RoHS (200295EC) |
SGS |
KA/2006/B1267 |
¡@ |
:: Motor General Specifications
Insulation Resistance |
100M
ohms or more when measured by a 500 VDC megger between the windings
and the frame after rated motor operation under normal ambient
temperature and humidity. |
Dielectric Strength |
Sufficient to
withstand 1.5 kV at 50 Hz and 60 Hz applied between the windings and
the frame for 1minute after rated motor operation under normal
ambient temperature and humidity. |
Temperature Rise |
144¢XF (80¢XC) or
less in the coil, as measured by the resistance change method after
rated operation with a gearhead installed. |
Insulation Class |
Class B (266¢XF
[130¢XC]) |
Overheat Protection |
Built-in thermal
protector (automatic return type) Open: 266¢XF ¡Ó 9¢XF (130¢XC ¡Ó 5¢XC)
Close: 179.6¢XF ¡Ó 27¢XF (82¢XC ¡Ó 15¢XC) |
Ambient Temperature |
14¢XF ~ 104¢XF (-10¢XC ~ +40¢XC) (nonfreezing) |
Ambient Humidity |
85% maximum (noncondensing) |
|
:: Accessories (included)
Model |
Quantity |
Product/Description/Standards |
PDF |
Capacitor
|
1 |
For single-phase Motor |
|
Screw |
4 |
Screw |
|
Key |
4 |
Key |
|
Leading
Wire |
1 |
length 20cm |
|
Motor with Fan
|
1 |
link the Motor shaft
¡Afor over 60W Motor |
|
Sheath of Shaft
|
1 |
Fpr
protect
external shaft |
|
|
:: Accessories (sold separately)
Model |
Product/Description/Standards |
PDF |
Mounting Brackets |
Motor/GearBox Mounting
Brackets/For Frame Size have 60mm¡B80mm¡B90mm¡B104mm Material:stainless steel
|
|
Leading
Wire |
length 30cm |
|
Leading
Wire |
length 50cm |
|
Leading
Wire |
length 100cm |
|
Independent Fan
|
Motor with Independent Fan¡Afor over 60W Motor |
|
|